
3 Card-Edge Control/Display
3-8 9363 PRODUCT MANUAL 9363-OM (V1.2)
Card-Edge Control/Display
Note: If using DashBoard remote control, ignore this section. Use of these controls
is required only if DashBoard is unavailable.
Figure 3-2 shows and describes the 9363 card edge controls, indicators, and
display. Refer to 9363 Function Submenu List and Descriptions (p. 3-2) for
detailed descriptions and selections available for the controls described in
Figure 3-2.
Figure 3-2 9363 Card Edge Controls
Alphanumeric Display
Item Select
Toggle Switch
Menu Select Switch
Item Function
Display Displays 4-digit abbreviated code showing menu and submenu selections. When in a menu displaying a
parameter setting, the display shows parametric scalar value (and +/- sign where applicable).
Menu Select
Switch
Selects card menu as follows:
0 – Home (card info read-only display)
1 – Input Reference Source Select
2 – Reference Rate Display/Select
3 – Output Channel Select
4 – Output Format Select (for output selected in menu 3)
5 – Output Vert Delay (for output selected in menu 3)
6 – Output Horiz Select (for output selected in menu 3)
7 – Audio Output Format
8 – Audio Output Co-Timing Source Select
9 – Audio Output Tone/Mute Select
A – AES Audio Output Level
Item Select
Switch
When toggled up or down, selects available item choices for menu selected using Menu Select switch. Refer to
Table 3-1, “9363 Function Submenu List (p. 3-3)” for items.
REFERENCE
LED
• Green – indicates card is receiving valid reference using selected external source
• Orange – indicates card is set to use internal source
• Off – no reference is present for selected external source
VIDEO 1 thru
VIDEO 4
LEDs
LED corresponding to output channels 1 thru 4 indicate:
• Green (solid) – Output channel is outputting genlock condition
• Green (blinking) – Output channel is outputting condition other than genlock
AUDIO LED • Green (solid) – AES output is outputting valid AES signal
• Green (blinking) – Output channel is outputting word clock
• Off – AES or word clock is user disabled
REFERENCE
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
AUDIO
Status
Indicators
9363
Comentarios a estos manuales