Cobalt-digital COMPASS 9086 Embedded Audio Loudness Processor Manual de usuario descargar pdf (Pagina 49)

9086-OM (V4.3) 9086-SD PRODUCT MANUAL 3-21

Operating Instructions 9086 Function Submenu List and Descriptions

(continued)

• SD Audio Depth Allows option of using 24-bit audio data structure per SMPTE 272M,

§3.10 (default is 20-bit per SMPTE 272M, §3.5).

Note: • If 24-bit depth is desired, make certain downstream equipment is

compatible with 24-bit SD audio data.

• Depth control setting applied here affects both Embedded Audio

Group 1/2 and 3/4.

• Group Enable

When enabled (On), enables the embedding of the corresponding

embedded audio group (Embedded Audio Group 3 or Embedded Audio

Group 4).

• Embedded Audio Group 3 consists of embedded channels 9 thru 12.

• Embedded Audio Group 4 consists of embedded channels 13 thru 16.

Two Group Enable buttons correspondingly enable or disable Embedded

Audio Group 3 and Embedded Audio Group 4.

Disabling a group removes the entire group of embedded audio channels

while preserving the settings of the channels belonging to the group.

Note: • Embedded Ch 9 thru Embedded Ch 16 have controls that are identical to the Source, Gain, Mute, and Phase controls

described for Embedded Ch 1. Refer to Embedded Audio Group 1/2 on page 3-17 for descriptions of these controls.

• For each channel, its source and destination should be considered and appropriately set. Unused destination channels

should be set to the Silence selection.

Table 3-2 9086 Function Submenu List — continued

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 77 78

Sin comentarios

Cobalt-digital COMPASS 9086 Embedded Audio Loudness Processor Manual de usuario Pagina 49